. .
31
PROGRAMMING
Exit:
Turn Ignition to
ON
position, or leave it for 15 seconds.
3 long
chirps
and
3 parking light flashes
will confirm programming exit.
SAFE START (Child safety mode)
Factory defaults setting to press the
button
twice
to start the vehicle.
Programming this feature to eliminate an accidental remote start, when kids
enter this transmitter, it requires: The user press the transmitters and
buttons
at the same time to start the vehicle.
START FEATURE # 2 PRORAMMING:
1.
Turn the Ignition switch
ON and OFF 3 times
and leave it in the
OFF
position.
2.
Press the
valet/program switch
10
times
and then hold it in on the
10
th
press until
five
chirps followed by
1 long chirp
is heard, release
the
valet/program switch.
You are now in the
START FEATURE #
2 PROGRAMMING MODE
.
3.
Press and release the transmitter button that corresponds to the feature
you desire to program.
START FEATURE CHART #2
One Chirp with
Press
One LED Pulse
Transmitter Factory Default Two Chirps with
Three Chirps with Four Chirps with
Button
Setting
Two LED Pulses
Three LED Pulses Four LED Pulses
1
Exit the programming mode. (3 long chirps and 3 parking light flashes
will confirm programming exit.)
2 +
Engine Checking Engine Checking Engine Checking Engine Checking
Voltage
TACH / RPM
Negative Oil
Positive Oil
Learning Mode
Sensor
Sensor
3
Start Timer:
0.8-second (2 chirps), 1.0-second (3 chirps) 1.2-second
0.6-second
(4 chirps), 1.4-second (5 chirps), 1.6-second (6 chirps),
1.8-second (7 chirps), 2.0-second (8 chirps), 3.0-
second (9 chirps), 4.0-second (10 chirps.
4
Low check level Hi check level
5 -
Start or stop the system for TESTING AND ADJUSTMENT
6 +
3 Hour Time
2 Hour Time
Start
Start
Summary of Contents for 650R
Page 1: ......
Page 7: ...7 INSTALLATION DIAGRAM Violet Wire Loop Selector for automatic or manual transmission...
Page 43: ......
