8
9
ter will arm or disarm your security system, No chirp sound will be heard, arm / disarm confirma-
tion will be through the vehicles parking lights only.
SHOCK SENSOr BY-pASS
: Press the button on the transmitter twice within seconds will
arm the security system, by-pass the shock sensor. The system will chirp one additional time
to confirm the sensor bypass mode was activated. The sensor bypass feature is programmed to
activate for one arming cycle only. The security system will return to normal operation during the
next arming cycle.
NOISELESS MOdE:
Press button once the siren chirps once, The system is armed. Press the
button twice more within seconds: The siren chirps once again, the system is now in Noiseless
mode; On this mode trigger, the zone 4 shock sensor, the trigger timer will be reduced from 0
seconds to 5 seconds.
The noiseless feature is programmed to activate for one arming cycle only. The security system will
return to normal operation during the next arming cycle.
HIddEN ALArM FUNCTION:
Press the
button first; within seconds press the button to
activate the hidden alarm function. The security system will arm and with “Hidden Alarm Func-
tion”. The siren / horn will be silenced even if the sensor is triggered in the armed status.
H. PASSIVE ARMING (See Feature “II - 2” Programming)
Active arming / disarming is controlling your security system via the remote transmitter. This secu-
rity system is equipped with an optional Passive Arming feature, which allows the security system
to arm 0 seconds after the last door is closed. Operation is as follows.
. Turn the ignition to the “OFF” position and exit the vehicle.
. After all entrances are closed, the security system LED will flash fast for 0 seconds. If you
reopen any door / hood / trunk, the security system LED will stop flashing. It will begin flashing
again once the vehicle all entrances are closed.
. After 0-second timer has elapsed, the security system will automatically “ARM”. The siren will
chirp [] time and the parking lights will flash [] time.
pASSIVE dOOr LOCKING:
(See Feature
“II - 2”
Programming)
The vehicle doors will automatically lock after passive arming cycle has been completed.
pASSIVE ArMING BY-pASS:
While the system disarmed, Press the
button twice, the security
will respond with [] chirp and LED will turn “ON”. The security system will remain in this tempo-
rally state for as long as you wish. To exit passive by-pass, press the transmitter or button
and the system will return to normal status.
I. ACTIVE DISARMING - UNLOCK & DISARM:
. Press button on the transmitter.
. The siren will chirp twice and parking light will flash twice to indicating that the security sys-
tem is now disarmed. The vehicle doors will unlock and dome light will turn on for 0 seconds
upon disarming when interfaced with the security system.
System disarm doors Trigger
Trunk/Hood
Trigger
Shock Sensor
Trigger
Ignition Trigger
CLEAr THE FLASHING ICON:
Press the
F
button times within seconds will clear the flashing
icon on the LCD screen transceiver.
TAMpEr dISArMING:
If alarm triggered, upon disarm the system, siren chirp 4 times, parking
light flash times.
pATHWAY ILLUMINATION
(See Alarm Feature
“II - 4”
Programming): This feature turns the
parking light “ON” for 0 seconds upon a unlock signal and for 0 seconds upon the lock signal.
TWO STEp dOOr UNLOCK:
This feature will independently unlock the drives door only when
disarming the security system. Pushing the button on the transmitter a second time within
seconds will unlock the entire vehicle.
AUTOMATIC rE-ArM
(See Feature
“I - 2”
Programming): If this feature is selected, the security
system will automatically re-arm itself 60 seconds after disarming with remote transmitter.
Automatic rearm will cancel if any door is opened before the 60 seconds timer has elapsed.
