8
9
remote Transmission
You are transmitting the signal to
control unit
In - range Indicator
Your are within the remote control
range.
door Open Warning
Doors are illegally opened (Zone )
Trunk/Hood Trigger
Trunk or Hood is illegally opened
(Zone )
Shock Sensor Trigger
Trigger on Shock Sensor (Zone 4)
Warn Away Trigger
Trigger on Shock Sensor (Zone )
Time Monitor
Alert Alarm
You have set morning call alarm
Count down Timer
Reminder when time is up for
parking
SAVE
power Save Mode
Save the battery power
Vibration Mode
Remote Control vibrates when the
system is triggered
Button Lock
Disable the transmission function
temporarily
driver paging
Someone is paging you in front of
your vehicle
Low Battery
You have to replace the battery of
remote control.
C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER:
Transmitter Button
Description
Operation
F
( second)
LCD screen lamp turns on for
5 seconds
Press and hold for second
melody sound to confirm
enters
F
( seconds)
Timer Programming Mode
Press and hold for seconds
-melody sounds to confirm
enter
F - F - F
Clear the Flashing Icon and
Melody Sound on the LCD
Screen Transmitter
Press within seconds
F -
(-second)
Melody / Vibration (
) Mode Press within seconds
F -
(-second)
Program Count Down (Parking)
Timer (0-Minute / 0M / 0
M /Hour /.5H / .0H)
Press within seconds to cycle
*leave the buttons starting
count down then
flashes
1. Screen Lamp ON:
Press and hold the
F
button one second, with one melody sound and the
LCD screen lamp will turns on for 5 seconds
2. Clear the Flash Icon and Melody Sound:
Press the
F
button times within seconds will
clear the flash icon and melody sound on the LCD screen transceiver
3. Stop The Trigger Melody Sound:
While triggering the alarm the LCD screen will alert user
through melody sound and flashing trigger icon, press any button on the LCD remote transmit-
ter to stop melody sound only.
4. Vibration / Melody Mode:
It is useful when you are in a noisy place and
difficult to hear beep sound from the remote control as the remote control
in this mode, vibrates itself if your security system is triggered.
Press the
F
button first, within seconds press and hold the button
for seconds to select the mode of vibration or melody, the
icon
will displayed on the LCD screen to show the LCD remote transceiver is on
vibration mode.
5. Low Battery Indication:
When the power of the battery weakens, it has two short “beep”
sound and flash
icon while pressing the button of the LCD screen transceiver.
6. Set Up Fixed Count down (parking) Timer:
. Press the
F
button first, within seconds press and hold the
button for seconds, the
LCD screen will shows icon and timer (ie. 0:0) ,
. Press the
button again showing next order time on the screen ( ie.0:0), press it again
(ie.0:0)…..and so on.
. Leave the buttons starting count down then icon flashes
Note:
. The count down period is fixed as 0 minutes, 0 minutes, 0 minutes, hour, .5 hours and
hours maximum.
. When count down timer showing 0:00 means to turn off the timer.
. Press F button for real time indication when the timer is counting down.
