4
5
. Once the system in car-jacking mode, If you are forced from the vehicle, the system will trigger
when the door is opened and closed while the ignition is “ON”.
TrIGGEr THE ANTI CAr -JACKING MOdE:
a). 50 seconds after the system has been triggered. The siren will start chirping for 5
seconds.
b). During this 5 seconds period of chirping, you will be alerted to push the valet switch
once to turn off the car-jacking feature. If not, it will enter second timer car jacking.
c). 65 seconds after the system has been triggered. The siren starts alarming and the parking
light starts flashing.
d). 90 seconds after the system has been triggered
. The siren still alarming and the parking light flashing, and
. The starter disable will activate to prevent the vehicle from starting.
. It will remain active until the vehicle’s battery power exhausted.
OVErrIdE THE SYSTEM TO TUrN OFF ANTI CAr- JACKING:
Turn the ignition switch from OFF to ON, and within 0 seconds push valet switch, the siren will
stop and the system disarmed
Note: If you use password pin code to double protect the vehicle security, you will need to use it to
completely disarm the system.
P. SYSTEM’S TRIGGER CHECK
(For two-way transceiver operation only)
Press the transceiver
F
button first, within seconds press
(C)
button. It responds with one melody sound and all trigger’s records will
immediately displayed on the LCD screen.
Q. SYSTEM’S STATUS CHECK
(For two-way transceiver operation only)
When you want to check the system’s present status through the LCD
screen, Press the transceiver
F
button twice, within seconds press
(C)
button. It responds with one melody sound, the LCD screen should
be illuminated.
R. DRIVER PAGING
(For two-way transceiver operation only)
It is useful the event that someone wants to page the driver of the parked
vehicle.
Indoor driving paging
Under the ignition switch “off” condition, press and hold the valet switch for seconds to page the
driver, one chirp sound shall be emitted from the vehicle and the paging melody sound continues
you Remote LCD transceiver and “
” indication flashes on the LCD screen.
Outdoor driving paging
If someone tries to page you by tapping the paging (knock) sensor (optional) which is usually
mounted on the bottom part of front window, the paging melody sound continues sounding from
your Remote LCD transceiver and “
” indication flashes on the LCD screen.
. Press the transmitter
F
button first, within seconds press (
≈
) button to activate outdoor
driver paging function, It responds with chirps of the vehicle, a melody sound and “
”
indication flashes on the LCD screen to confirm the function is on.
. When tapping the paging (knock) sensor, one chirp sound shall be emitted from the vehicle
and the paging melody sound continues sounding from your Remote LCD transceiver and
“
” indication flashes on the LCD screen. Turn on the ignition switch; OR press the but-
ton to arm the system; OR press the button to disarm the system, this outdoor driver paging
function will exit.
S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION
The alarm with a unique feature which will turn on your vehicle dome light as following:
. Upon disarming, the interior lights will remain on for 0 seconds.
. If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: Turn ON the ignition switch or arm the alarm will turn off the dome light.
