manualshive.com logo in svg

Aleratec 1:1 DVD/CD Copy Cruiser Pro HLS, User Manual

Share
Download
Aleratec 1:1 DVD/CD Copy Cruiser Pro HLS User Manual Download Page 58

www.aleratec.com

52

Using the DVD/CD Duplicator

Using the Duplicator as a DVD/CD-Recorder

 - continued

Connect the USB 2.0 Data Cable to the Duplicator.

 

▪

Align and gently insert the USB 2.0 Data Cable into an available USB 

2.0 port on your computer, making sure you do not bend the connector.

For P/N 260147 and 260148 and systems running Windows 98SE only: 

 

▪

Install the USB 2.0 Drivers.

If you are running Windows 98SE: After your computer starts up, insert 

the USB 2.0 Driver Software in your computer’s DVD/CD-ROM drive, 

and run the driver install program to complete your installation. 

Note: This step is not needed if you are not running Windows 98SE.

Go to Adv Setup step 13 and switch to USB Mode. Your computer should 

2. 

recognize the DVD/CD-Recorder in the DVD/CD Duplicator.

Install the software from the included CD.

3. 

Summary of Contents for 1:1 DVD/CD Copy Cruiser Pro HLS





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands