Aleratec 1:1 DVD/CD Copy Cruiser Pro HLS User Manual Download

Page: 4 / 68

www.aleratec.com

Safety Regulations

WARNING

To prevent fire or shock hazard, do not expose the

unit to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to authorized personnel

only.

CAUTION

As the laser beam in these DVD/CD Duplicators

is harmful to the eyes, do not attempt to

disassemble the cabinet. Refer servicing to

authorized personnel only.

The use of optical instruments with this product

will increase eye hazard.

This DVD/CD Duplicator is classified as a

CLASS 1 LASER PRODUCT.

The CLASS 1 LASER PRODUCT label is

located on top of the internal drive enclosure.

CLASS 1

LASER PRODUCT
LASER KLASSE 1

PRODUKT

Summary of Contents for 1:1 DVD/CD Copy Cruiser Pro HLS




































































Search results

Summary of Contents for 1:1 DVD/CD Copy Cruiser Pro HLS

Reviews:

Related manuals for 1:1 DVD/CD Copy Cruiser Pro HLS

Brands by name

Popular brands

Aleratec 1:1 DVD/CD Copy Cruiser Pro HLS, User Manual

Search results

Summary of Contents for 1:1 DVD/CD Copy Cruiser Pro HLS

Reviews:

Related manuals for 1:1 DVD/CD Copy Cruiser Pro HLS

Brands by name

Popular brands