www.alemitecarbonshield.com
28 | alemite Carbon Shield Service Sheet
using “Adaptive
Mode” feature
The Adaptive Mode feature allows the end user to
accept system operating settings different from the
default values stored in the PLC. These differences
can be produced by the actual installation conditions
such as pressure drops due to the number of
nozzles or length of the distribution pipes.
The Adaptive Mode is a password protected
feature that can be accessed at any time through
the Set Up or the Change Parameter screen
following the steps below:
1. Make sure the system is running as desired
without leaks or blockages.
2. Go to the “Main Menu” screen. Select the
“Set Up” button. (Fig. 72)
3. Enter the user name and password. (Fig. 73)
4. Select the “Set Up” button again. (Fig. 72)
5. Select the “Adaptive Mode” button to accept
the current system parameters (Fig. 74)
6. The screen will show the “Adaptive Mode”
(Fig. 75) message and after a short time delay
the “System OK” will appear. (Fig. 76)
Fig. 72
Fig. 74
Fig. 76
Fig. 73
Fig. 75
Summary of Contents for Carbon Shield
