www.alemitecarbonshield.com
ALEMITE CARbON SHIELD SERvICE SHEET | 25
17. When oil level is within 5% of the displayed
level, return to System Setup and turn
Automatic Refill on.
18. Select “Nozzle Size” (Fig 57).
18a. Choose the size nozzle you have. If you are
unsure which nozzle you have, look for the
nozzle size stamped into the top of the
mist head.
important note: The nozzle capacity selection
instructs the PLC to load default parameter
values at 20 in H2O; which is the Alemite®
system’s Design Manifold Pressure.
18b. A small green indicator will appear in the
upper right corner of the button when
a selection is made (Fig 58).
18c. If an incorrect nozzle size is selected, simply
select the proper nozzle size, the green
indicator on the selected button will light up,
and the selection process is complete. (Fig. 59)
Fig. 55
Fig. 58
Fig. 59
Fig. 56
Fig. 57
Summary of Contents for Carbon Shield
