Alean AL-238P, Installation Manual

Page: 20 / 29

AL-238
PPROGRAMMING GUIDE
20
plus the phone number plus # before
entering the phone number;
For example: the group outgoing number
is 0, use the number 1 to dial the user's
phone:
Input in programming state
18+01+0+*+user #
Note: "*" means waiting for 1 second.
Each additional "*" means the waiting
time increases by one second. Press "#"
to end and save the programming.
Clear number method: 18+N+# clear
phone number;
Zone
correspondi
ng
phone
number 19 01
0
（
1 digit
）
Dial user’s
phone number
after zone 1 alarms Input format: 19+N+X+#;
N represents the programming address:
01~40, that is, the alarm dialing setting
of the defense zone 1~40;
X means 1
～
8: designated to dial one of
the user numbers 1
～
8;
0=Dial all calls;
The factory default is 0;
For example: after zone 1 alarms, assign
user number 8 to dial:
Input in programming state
19+01+8+#;
02
0
（
1 digit
）
Dial user’s
phone number
after zone 2 alarms
… … …
40
0
（
1 digit
）
Dial user’s
phone number
after zone 40
alarms
Call Center 20 01 Call center 1 num
ber Attachment: (only telephone line supp
orts CID protocol)
1. Up to 16 digits;
2. In the input of the address phone
number, when an internal line dials an
external line, enter the external line
number first, then enter "*" and wait f
or 1 second. Each additional "*" will i
ncrease the waiting time by one seco
nd, and then enter the phone number
Press "#" to end;
3. The information of automatic dialing
of the alarm center phone includes:
system restart, setting, reset, arming,
disarming, emergency alarm, zone ala
rm, and zone recovery;
02 Call center 2 num
ber
03 Call center 3 num
ber
04
Call center 4 num
ber
Center num
ber attribut
e setting 21 01
0
（
1 digit
）
Center number 1
attribute setting
0=Main center; 1=Backup center; 2=D
edicated line for arming; 3=Dedicated
line for disarming;
02
0
（
1 digit
）
Center number 2
attribute setting
03
0
（
1 digit
）
Center number 3
attribute setting
04
0
（
1 digit
）
Center number 4
attribute setting
Center uplo
ad report c
ontent setti
ngs 22 01
0
（
1 digit
）
Center 1 upload r
eport content setti
ngs
0=All events are transmitted to the ce
nter;
1=Only the alarm information transmis
sion center;
2=Only the arm and disarm informatio
n transmission center;
02
0
（
1 digit
）
Center 2 upload r
eport content setti
ngs
03
0
（
1 digit
）
Center 3 upload r
eport content setti
ngs