AL-238
PPROGRAMMING GUIDE
15
40
111
（
3 digits
）
Attribute of
zone 40
X indicates the type of zone
：
0
：
Shield
zone
；
1
：
instantaneous zone
；
2
：
delay zone
；
3
：
24-hour zone
；
4
：
fire
zone
；
5
：
blank
；
6
：
temperature
sensing zone
7
：
ambulance zone;
8
：
Trigger the arm and disarm zone
(When triggered, the panel arming ,
triggers again the panel disarming )
9
：
Intelligent arming and disarming the
zone (if the zone is not triggered for a
long time, the panel will automatically
arming, trigger the zone, and the panel
will disarm. Time refers to the smart
zone settings, including time and trigger
times)
Y indicates siren status
：
0 : Silent alarm
；
1 : sound alarm
；
2
：
Intercom zone (after setting as an
intercom zone, answer the call and enter
the intercom mode directly);
Z means
：
0
：
zone at home
；
1
：
zone
not at home
；
System default value is 111;
For example
：
The first zone will be set
as 24 hours zone and sound zone, then
we need input
：
07+01+3+1+0+#;
Settings of
smart
zones
08
01
00000
（
5 digits
）
Parameter setting
of smart zone 1
Input format
：
08+N+XXYYZ+#
；
N indicates programming address
：
01~40
，
means
：
zone 1~40
；
XXYY indicates
：
XX m YY s Z indicates
times of being triggered -- programming
value is 1~9.
For example
：
The smart zone of wired
zone 1 is set to last 10 seconds. trigger
3 times as an alarm prompt,
Under programming state enter:
08+01+0010+3+#
；
02
00000
（
5 digits
）
Parameter setting
of smart zone 2
...
....
...
39
00000
（
5 digits
）
Parameter setting
of smart zone 39
40
00000
（
5 digits
）
Parameter setting
of smart zone 40
Settings
of wireless
zones
09
00
Eliminate all
wireless zones.
Input Format
：
09+00+9+#
；
that
means eliminate all
wireless zone codes.
01
Zone 1 wireless
self-learning
Input Format
：
09+N+X+#
；
N indicates programming address
01~40
，
which means
：
which
means the match code of zones 1-40
X means:
X=1,which means to wait for
the wireless detector to trigger, to trigger
twice, each time interval more than 2
seconds, the prompt "wireless self-
learning success" twice indicating
successful learning, and quit the current
self-taught programming.; X=9 Means to
clear the original learned wireless code.
Within 30 seconds, if there is no button,
it will automatically exit the self-learning
mode;
For example
：
study zone 1
02
Zone 2 wireless
self-learning
.....
40
Zone 40
wireless self-
learning
