Storage and transport
23
www.coreservice.co.uk
AFTER SALES SUPPORT
GB IRE
GB
01904727501
IRE
019022605
Check the filter after each use and clean it if necessary. To do so, proceed as follows:
1. Screw the water inlet adapter
21
off and take the dirt filter (arrow) out
(see
fig. 16
).
2. Rinse the dirt filter out until it is free of dirt and deposits.
3. Put the dirt filter
and the water inlet adapter back in place.
High pressure nozzle
− Clean the high pressure nozzle using the enclosed nozzle pin
22
(see fig
. 17
).
Maintenance
The pump of the 2.2 kW high pressure washer itself requires no maintenance.
No additional care is necessary.
Storage and transport
NOTICE!
Risk of damage!
There is always some leftover water that remains in the 2.2 kW high
pressure washer and the pump that could result in damage.
− Do not store the 2.2 kW high pressure washer at temperatures
under the freezing point as this may result in frost damage.
− If you take the 2.2 kW high pressure washer out of commission
for a prolonged period of time, empty the cleaner container
and let the water drain out of the hoses.
Figure 16
Figure 17
