Operation
21
www.coreservice.co.uk
AFTER SALES SUPPORT
GB IRE
GB
01904727501
IRE
019022605
1. Stop the 2.2 kW high pressure washer
6
and switch the ON/OFF switch
5
to OFF.
2. Briefly depress the trigger
16
for the spray gun
15
to release system pressure.
3. Instead of the spray lance
14
or turbo lance
13
, insert the rotating brush
12
(see
fig. 13
).
Automatic supply of cleaners
NOTICE!
Risk of damage!
Using other cleaning solutions or chemicals can affect the safety of
the 2.2 kW high pressure washer.
− Only use cleaners supplied or recommended by the
manufacturer.
− In the event of direct contact with your skin or mucous
membranes and the cleaner, rinse the affected area with
plenty of clean water and consult a physician if necessary.
This 2.2 kW high pressure washer is equipped with a device for the automatic supply
of cleaners for the water jet. Follow the steps below to use the function:
1. Prepare the cleaner by thinning the cleaning solution
20
1 part to 10.
Please note that the cleaner container has a capacity of approx. 1 l.
2. Lock the trigger
16
for the spray gun
15
by flipping the yellow safety lock
17
up until it locks in place (see
fig. 14
).
Figure 13
Figure 14