Operation
20
www.coreservice.co.uk
AFTER SALES SUPPORT
20
GB IRE
GB
01904727501
IRE
019022605
Turning the nozzle head
by 180° changes from the dot jet to the flat jet:
− Turn the nozzle head counterclockwise to set a dot jet. The further you turn the
nozzle head clockwise the wider the flat jet will become (see
fig. 12
).
The dot jet is particularly suitable for cleaning very dirty, confined
areas; the flat jet is ideal for cleaning surfaces.
Using the turbo lance
NOTICE!
Risk of damage!
When using the turbo lance, there is a very high risk of damaging
sensitive surfaces.
− Be carefully, start working at an increased distance and reduce
it if necessary.
The turbo lance produces a rotating high pressure jet that can also get rid of stubborn
dirt.
1. Stop the 2.2 kW high pressure washer
6
and switch the ON/OFF switch
5
to OFF.
2. Briefly depress the trigger
16
for the spray gun
15
to release system pressure.
3. Instead of the spray lance
14
insert the turbo lance
13
(see
fig. 4
, page 15).
Using the rotating brush
The rotating brush is a tool for delicately cleaning surfaces. In the process, the high
pressure jet is used to operate the brush; the water only strikes the surface to be
cleaned at low pressure.
The moving brush achieves the cleaning effect and the removed dirt is washed away
with the water.
Figure 12
