First use
15
www.coreservice.co.uk
AFTER SALES SUPPORT
GB IRE
GB
01904727501
IRE
019022605
− In this case, use a water backflow preventer or a supply hose
set approved in accordance with IEC 61770.
The following work steps are required to prepare the device for operation:
1. Fit the handle
1
on the 2.2 kW high pressure washer
6
. Secure it with the
2 enclosed cross-slotted screws
19
(see
fig. 1
).
2. Attach the holder for the spray gun
11
and the cord holder
4
to the receptacles
on the 2.2 kW high pressure washer up to the stop point (see
fig. 2
).
3. Remove the protective cap
18
from the threaded socket of the spray gun
15
and
screw the high pressure hose
3
tightly onto the spray gun (
see fig. 3
).
4. Fit the turbo lance
13
or the adjustable spray lance
14
in the connection for the
spray gun and turn the spray lance clockwise by 90° to lock it in this position
(see
fig. 4
).
5. Remove the protective cap
9
from the threaded socket
8
of the
2.2 kW pressure washer and screw the water inlet adapter
21
onto the threaded
socket until hand tight (see
fig. 5
).
6. Connect the supply hose with a quick-lock coupling (not included in the product
contents) with the water inlet adapter on the 2.2 kW high pressure washer
(see
fig. 6
).
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
