Alcatel SPEED TOUCH PRO, User Manual

Page: 90 / 238

Introduction
Advanced routing
In this subsection
'Routing' box
9 Configuration and Use - PPP & IP Routing
90 / 238
3EC 17059 ABAA TCZZA Ed. 01
9.4.3 IP Routing Related Configurations
If a PPP session is opened successfully (either manually by the user,
triggered by LAN traffic, or automatic at boot time), routes are
automatically added to the STPro 's routing table.
For advanced users, the STPro allows manual configuration of
routes to dedicated destinations.
See section 12.5 for more information.
Moreover, routes can be configured via the CLI, which will only be
added to the IP route table upon establishing the PPP connection.
See chapter 18 for more information on the CLI.
'Routing' box
Connection Sharing
Connection Sharing Subnet Values
'My net only' Configuration
Destination Networks
Destination Networks Subnet Values
Address Translation ( )
Primary and Secondary DNS Server.
The following figure shows the 'Routing' input box: