Alcatel SPEED TOUCH PRO, User Manual

Page: 138 / 238

IP routing and IP
addresses
STPro IP addresses
PC IP address
configuration
Default gateway for
the PCs
PPP & IP Routing
CIP & IP Routing
12 Networking Services - IP
138 / 238
3EC 17059 ABAA TCZZA Ed. 01
12.2.3 Routed Packet Services
Local IP addresses must be configured prior to use IP routing.
As the STPro has a preconfigured Net10" address (10.0.0.138),
you can configure IP addresses like 10.0.0.1, 10.0.0.2, ... in your
PCs, or use the STPro DHCP server.
In case another IP address is required, you can set STPro 's IP
address via the STPro pages.
See sections 12.3 and 16.1 for more information.
The PC IP address can be configured statically (no DHCP), or
dynamically ( STPro as DHCP server).
In addition, configure the STPro 's IP address as default gateway in
your PCs.
At the DSL side of the STPro IP router, PPP automatically
negotiates an IP address with its remote PPP peer.
You can configure the PPP local IP address of the
STPro . In special
circumstances, you can configure a remote IP address for the PPP
connection.
See subsection 9.4.4 for more information.
As it name implies Classical IP & IP Routing relies on basic IP
Addressing and routing for its packet forwarding.
I.e. both local as remote users on either side of the DSL
connection experience the LIS environment as if they are sharing
one single network.
The configuration and use of all IP specific issues for a Classical IP
environment is profoundly described in chapter 10.