Alcatel SPEED TOUCH PRO, User Manual

Page: 142 / 238

Default STPro IP
address
In this subsection
Setting an IP address
via the 'Initial Setup'
page
12 Networking Services - IP
142 / 238
3EC 17059 ABAA TCZZA Ed. 01
12.3.2 Static IP Address Configuration
In case you add the STPro to an existing LAN, it could be that you
must configure a User Defined" IP address, other than the Net
10" address, appropriate for the LAN's IP settings.
Setting an IP Address via the 'Initial Setup' Page
Setting an IP Address via the ' Routing' Page.
Proceed as follows:
1. Click in the left pane of the STPro pages to pop up
the 'Initial Setup' page (See section 17.2 for more
information):
2. Enter an IP address in the 'IP Address' field.
3. Enter a netmask for applying subnetting in your network in the
'Subnetmask' field.