Alcatel SPEED TOUCH PRO, User Manual

Page: 19 / 238

Service offering
Selection criteria
Default STPro VPI/VCI
settings
1 Speed Touch Quick Guide
19 / 238
3EC 17059 ABAA TCZZA Ed. 01
1.2.3 Check your Service Provider's Offering
The SP provides at least the following information:
The VPI/VCI of the Virtual Channel (VC) to use on the DSL
line
The Packet Service supported on this VC
The Encapsulation Method (if different from the Packet
Service's default encapsulation).
Example :
VPI/VCI = 0/35
Packet Service = Transparent Bridging
Encapsulation Method : Bridge default, i.e. LLC/SNAP
Your STPro supports multiple simultaneous VCs on the DSL line. If
your SP exploits this capability, he will provide this information per
VC.
For more information on the criteria to prefer one Packet Service
over the other, see chapter 5.
The VPI/VCI value of the default configured VCs are listed in
appendix C.
In the event that the provided VPI/VCI differ with the
STPro
defaults, you can change VC settings via the STPro pages.
See section 11.3 for more information.