Alcatel SPEED TOUCH PRO, User Manual

Page: 203 / 238

Introduction
In this section
Telnet features
Telnet requirements
18 Maintenance - Speed Touch CLI
203 / 238
3EC 17059 ABAA TCZZA Ed. 01
18.1.1 CLI through a Telnet Session
Via a PC or terminal connected to the Ethernet interface of the
STPro you can execute CLI commands.
However, you must gain access to the STPro first, by opening a
TCP/IP Telnet session.
Telnet Features
Telnet Requirements
Using a Telnet Session to your STPro .
Telnet is:
A fairly general, bidirectional, eightbit byteoriented
communication facility
A standard method of interfacing terminal devices to each
other.
Prior to using Telnet, you need:
A connected, and configured STPro with known IP address or
DNS hostname
If applicable, the system password for accessing the STPro
A PC or terminal connected to the LAN
Note : LAN is referred to as a network containing at least one PC or
terminal, and your STPro .
A TCP/IP suite installed on this PC or terminal
A Telnet session application installed on this PC or terminal.