Alcatel SPEED TOUCH 710, User Manual

Page: 215 / 254

Introduction
In this section
Telnet features
Telnet requirements
20 Maintenance - Speed Touch CLI
215 / 254
3EC 17605 AAAA TCZZA Ed. 02
20.1.1 CLI through a Telnet Session
Via a PC or terminal connected to the Ethernet interface of the
AST710 you can execute CLI commands.
However, you must gain access to the AST710 first by opening a
TCP/IP Telnet session.
Telnet Features
Telnet Requirements
Using a Telnet Session to your AST710 .
Telnet is:
A fairly general, bidirectional, eightbit byteoriented
communication facility
A standard method of interfacing terminal devices to each
other.
Prior to using Telnet, you need:
A connected, and configured AST710 with known IP address,
or DNS hostname
If applicable, the system password for accessing the AST710
A PC or terminal connected to the LAN
Note : LAN is referred to as a network containing at least one PC or
terminal, and your AST710 .
A TCP/IP suite installed on this PC or terminal
A Telnet session application installed on this PC or terminal.