Alcatel SPEED TOUCH 710, User Manual

Page: 121 / 254

Adding CIP members
Result
11 Configuration and Use - CIP & IP Routing
121 / 254
3EC 17605 AAAA TCZZA Ed. 02
Proceed as follows:
1. Browse to the ' CIP' page.
Addition of a CIP member is performed in the 'CIP Interfaces'
table.
2. Fill in the following CIP member parameters:
Local IPaddress
The IP address of the CIP member at your local side of
the LIS.
Mask
The associated netmask/subnetmask for this local IP
address.
3. Click and to finish the procedure.
A CIP member of the LIS is created at your AST710 's CIP interface
side of the LIS. The local IP address is added to the 'IP Address'
table.
Two default routes are added to the
'IP Route' table, both pointing
to the AST710 as gateway, but the first with the CIP member itself
as destination, the second with the LIS subnetwork IP address pool
as destination.