Alcatel SPEED TOUCH 710 User Manual Download Page 12

Page: 12 / 254

Delivery check

Damaged or missing

items

Other materials

1 Speed Touch Quick Guide

/ 254

3EC 17605 AAAA TCZZA Ed. 02

1.1

Get Acquainted with your Speed Touch

Check your

AST710

package for the following items:

The

Alcatel Speed Touch



710

1 Power supply adapter with 2m (6.56ft.) connecting cable

2m Ethernet straightthrough cable (RJ45/RJ45)

2m DSL cable (RJ11/RJ11, RJ14/RJ14)

1m Green ground cable for signal ground connector

1 Wall mounting assembly

2 Screws and 2 wall plugs for the wall mounting assembly

This User's Guide, either in hard copy format or on CDrom.

In the event of damaged or missing items, contact your local

product dealer for further instructions.

Your

AST710

shipping carton may also include release notes,

safety and conformity declarations and other materials.

Summary of Contents for SPEED TOUCH 710































































































































































































































































Search results

Summary of Contents for SPEED TOUCH 710

Reviews:

Related manuals for SPEED TOUCH 710

Brands by name

Popular brands

Alcatel SPEED TOUCH 710, User Manual

Search results

Summary of Contents for SPEED TOUCH 710

Reviews:

Related manuals for SPEED TOUCH 710

Brands by name

Popular brands