Rack-Mounting
Chassis and Power Supplies
page 2-10
OmniSwitch 10K Hardware Users Guide
August 2015
Standalone (Non-Rack Mounted) Installations
The chassis can also be placed unmounted on a stable, flat surface as a standalone unit. Be sure that the
surface can accommodate the full, populated weight of all switches being installed. Approximate chassis
weights are provided on
page 2-3
.
For a standalone unit, use two or more people to move and position the unpopulated chassis upright on the
surface where it is to be installed. Be sure that adequate clearance has been provided for chassis airflow
and that you have placed the chassis within reach of all required AC outlets. For recommended airflow
allowances, refer to
page 2-7
.
Note
. Chassis must be placed “right side up.” Never attempt to operate a switch while it is lying on its side
or back.
