Chassis and Power Supplies
Chassis Power Budget
OmniSwitch 10K Hardware Users Guide
August 2015
page 2-17
Installing Power Supplies
1
Orient the power supply so that the power cord socket is situated at the right of the power supply. Also,
for the power supply to seat properly, make sure that the handle is in the open (horizontal) position as
shown.
2
Slide the power supply back until its connector meets the chassis backplane.
3
When the power supply is fully seated, rotate the handle 90 degrees to the closed (vertical) position.
4
Tighten the captive screw, located at the top-left of the power supply’s front panel.
5
Plug the power cord (provided) into the power supply’s socket.
