Grounding the Chassis
Chassis and Power Supplies
page 2-24
OmniSwitch 10K Hardware Users Guide
August 2015
Grounding the Chassis
The switch has two threaded holes for grounding screws located on the rear of the chassis. These holes use
10-32 screws and are surrounded by a small paint-free rectangular area, which provides metal-to-metal
contact for a ground connection.
Use this connector to supplement the ground provided by the AC power cord. To do so, install a Panduit
Grounding Lug (type LCD8-10A-L) using 8AWG copper conductors to the paint-free rectangular area.
Refer to the rear chassis view on
page 2-2
for location details.
