manualshive.com logo in svg

Alcatel-Lucent 7950 SR, System Management Manual

Share
Download
Alcatel-Lucent 7950 SR System Management Manual Download Page 51

Security

7950 SR OS System Management Guide

Page 51

Encryption

Data Encryption Standard (DES) and Triple DES (3DES) are supported for encryption.

•

DES is a widely-used method of data encryption using a private (secret) key. Both the 
sender and the receiver must know and use the same private key.

•

3DES is a more secure version of the DES protocol.

802.1x Network Access Control

The Alcatel-Lucent OS supports network access control of client devices (PCs, STBs, etc.) on 
an Ethernet network using the IEEE. 802.1x standard. 802.1x is known as Extensible 
Authentication Protocol (EAP) over a LAN network or EAPOL.

TCP Enhanced Authentication Option

The TCP Enhanced Authentication Option, currently covered in draft-bonica-tcp-auth-05.txt, 

Authentication for TCP-based Routing and Management Protocols

, extends the previous 

MD5 authentication option to include the ability to change keys without tearing down the 
session, and allows for stronger authentication algorithms to be used.

Summary of Contents for 7950 SR















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands