manualshive.com logo in svg

Alcatel-Lucent 7950 SR, System Management Manual

Share
Download
Alcatel-Lucent 7950 SR System Management Manual Download Page 267

SNMP

7950 SR OS System Management Guide

Page 267

Configuration Commands

SNMP System Commands

engineID

Syntax

[

no

]

 engineID engine-id

Context

config>system>snmp

Description

This command sets the SNMP engineID to uniquely identify the SNMPv3 node. By default, the 
engineID is generated using information from the system backplane.

If SNMP engine ID is changed in the 

config>system>snmp> engineID engine-id

 context, the current 

configuration must be saved and a reboot must be executed. If not, the previously configured SNMP 
communities and logger trap-target notify communities will not be valid for the new engine ID.

Note

: In conformance with IETF standard RFC 2274, 

User-based Security Model (USM) for version 

3 of the Simple Network Management Protocol (SNMPv3)

, hashing algorithms which generate 

SNMPv3 MD5 or SHA security digest keys use the engineID. Changing the SNMP engineID 
invalidates all SNMPv3 MD5 and SHA security digest keys and may render the node unmanageable. 

When a chassis is replaced, use the engine ID of the first system and configure it in the new system to 
preserve SNMPv3 security keys. This allows management stations to use their existing authentication 
keys for the new system. 

Ensure that the engine IDs are not used on multiple systems. A management domain can only have 
one instance of each engineID.

The 

no

 form of the command reverts to the default setting.

Default

The engine ID is system generated.

Parameters

engine-id — 

An identifier from 10 to 64 hexadecimal digits (5 to 32 octet number), uniquely 

identifying this SNMPv3 node. This string is used to access this node from a remote host with 
SNMPv3. 

general-port

Syntax

general-port port-number
no general-port

Context

config>system>snmp

Description

This command configures the port number used by this node to receive SNMP request messages and 
to send replies. Note that SNMP notifications generated by the agent are sent from the port specified 
in the 

config>log>snmp-trap-group>trap-target

 CLI command.

Summary of Contents for 7950 SR















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands