manualshive.com logo in svg

Alcatel-Lucent 7950 SR, System Management Manual

Share
Download
Alcatel-Lucent 7950 SR System Management Manual Download Page 110

General Security Commands

Page 110

7950 SR OS System Management Guide

Values

cflowd, dns, ftp, ntp, ping, ptp, radius, snmptrap, sntp, ssh, syslog, tacplus, telnet, 
traceroute, mcreporter

ip-int-name | ip-address  — 

Specifies the name of the IP interface or IP address. If the string contains 

special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.

application6

Syntax

application6 app

 

ipv6-address

no application6

Context

config>system>security>source-address

Description

This command specifies the application to use the source IPv6 address specified by the 

source-

address

 command.

Parameters

app — 

Specify the application name.

Values

cflowd, dns, ftp, ntp, ping, radius, snmptrap, syslog, tacplus, telnet, traceroute

ipv6-address — 

Specifies the name of the IPv6 address. 

telnet-server

Syntax

[

no

]

 telnet-server

Context

config>system>security

Description

This command enables Telnet servers running on the system. 

Telnet servers are off by default. At system startup, only SSH servers are enabled.

Telnet servers in networks limit a Telnet clients to three retries to login. The Telnet server disconnects 
the Telnet client session after three retries.

The 

no

 form of the command disables Telnet servers running on the system.

telnet6-server

Syntax

[

no

]

 telnet6-server

Context

config>system>security

Description

This command enables Telnet IPv6 servers running on the system. 

Telnet servers are off by default. At system startup, only SSH server are enabled.

The 

no

 form of the command disables Telnet IPv6 servers running on the system.

Summary of Contents for 7950 SR















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands