Alcatel-Lucent 7950 SR, System Management Manual

Page: 426 / 462

Show Commands
Page 426 7950 SR OS System Management Guide
2015 ospfLsdbApproachingOverflow WA gen 0 0
2016 ospfIfStateChange WA gen 2 0
2017 ospfNssaTranslatorStatusChange WA gen 0 0
2018 vRtrOspfSpfRunsStopped WA gen 0 0
2019 vRtrOspfSpfRunsRestarted WA gen 0 0
2020 vRtrOspfOverloadEntered WA gen 1 0
2021 vRtrOspfOverloadExited WA gen 0 0
2022 ospfRestartStatusChange WA gen 0 0
2023 ospfNbrRestartHelperStatusChange WA gen 0 0
2024 ospfVirtNbrRestartHelperStsChg WA gen 0 0
=======================================================================
A:ALA-1#
A:ALA-1# show log event-control ospf ospfVirtIfStateChange
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
2001 ospfVirtIfStateChange WA gen 0 0
=======================================================================
A:ALA-1#
file-id
Syntax file-id [ log-file-id ]
Context show>log
Description This command displays event file log information.
If no command line parameters are specified, a summary output of all event log files is displayed.
Specifying a file ID displays detailed information on the event file log.
Parameters log-file-id — Displays detailed information on the specified event file log.
Output Log File Output — The following table describes the output fields for a log file summary.
Label Description
file-id The log file ID.
rollover The rollover time for the log file which is how long in between parti-
tioning of the file into a new file.
retention
The retention time for the file in the system which is how long the file
should be retained in the file system.
admin location The primary flash device specified for the file location.
none —
indicates no specific flash device was specified.
oper location The actual flash device on which the log file exists.