manualshive.com logo in svg

Alcatel-Lucent 7950 SR, System Management Manual

Share
Download
Alcatel-Lucent 7950 SR System Management Manual Download Page 408

Accounting Policy Commands

Page 408

7950 SR OS System Management Guide

packets-denied-count

Syntax

[

no

]

 packets-denied-count

Context

config>log>acct-policy>cr>aa>aa-from-sub-cntr
config>log>acct-policy>cr>aa>aa-to-sub-cntr

Description

This command includes the denied packet count in the AA subscriber's custom record.

The 

no

 form of the command excludes the denied packet count.

Default

no packets-denied-count

to-aa-sub-counters

Syntax

to-aa-sub-counters 
no to-aa-sub-counters

Context

config>log>acct-policy>cr>aa

Description

This command enables the context to configure Application Assurance “to subscriber” counter 
parameters.

The 

no

 form of the command excludes the “to subscriber” count.

queue

Syntax

[

no

]

 queue queue-id

Context

config>log>acct-policy>cr

Description

This command specifies the queue-id for which counters will be collected in this custom record. The 
counters that will be collected are defined in egress and ingress counters.

The 

no

 form of the command reverts to the default value.

Parameters

queue-id — 

Specifies the queue-id for which counters will be collected in this custom record.

e-counters

Syntax

[

no

]

 e-counters

Context

config>log>acct-policy>cr>override-cntr
config>log>acct-policy>cr>queue
config>log>acct-policy>cr>ref-override-cntr
config>log>acct-policy>cr>ref-queue

Description

This command configures egress counter parameters for this custom record.

The 

no

 form of the command reverts to the default value.

Summary of Contents for 7950 SR















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands