manualshive.com logo in svg

Alcatel-Lucent 7950 SR, System Management Manual

Share
Download
Alcatel-Lucent 7950 SR System Management Manual Download Page 192

CPU Protection Commands

Page 192

7950 SR OS System Management Guide

out-profile–rate: 6000

alarm

Policy 255 (default network interface policy):

per-source-rate: max (no limit)

overall-rate :  max (no limit)

out-profile-rate: 3000

alarm

Parameters

cpu-protection-policy-id — 

Assigns a policy ID to the specific CPU protection policy.

Values

1 — 255

create — 

Keyword used to create CPU protection policy. The 

create

 keyword requirement can be 

enabled/disabled in the 

environment>create 

context.

alarm

Syntax

[

no

] 

alarm

Context

config>sys>security>cpu-protection>policy

Description

This command enables the generation of an event when a rate is exceed.   The event includes 
information about the offending source. Only one event is generated per monitor period.

The 

no

 form of the command disables the notifications.

Default

no alarm

eth-cfm

Syntax

eth-cfm 
no eth-cfm

Context

config>sys>security>cpu-protection>policy 

Description

Provides the construct under which the different entries within CPU policy can define the match cri-
teria and overall arrival rate of the Ethernet Configuration and Fault Management (ETH-CFM) pack-
ets at the CPU.

Default

None

Summary of Contents for 7950 SR















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands