manualshive.com logo in svg

Alcatel-Lucent 7450 ESS Series, Configuration Manual, Page: 482 / 540

Share
Download
Alcatel-Lucent 7450 ESS Series Configuration Manual Download Page 482

Page 482

7450 ESS OS Router Configuration Guide

Version 9

The Version 9 format is a more flexible format and allows for different  templates or sets of cflowd 
data to be sent based on the type of traffic being sampled and the template set configured.

Version 9 is interoperable with RFC 3954, 

Cisco Systems NetFlow Services Export Version 9

.

Version 10

Version 10 is a new format and protocol that inter-operates with the specifications from the IETF 
as the IP Flow Information Export (IPFIX) standard. Like Version 9, the version 10 format uses 
templates to allow for different data elements regarding a flow that is to be exported and to handle 
different type of data flows such as IPv4, IPv6, and MPLS.

Version 10 is interoperable with RFC 5150 and 5102.

Summary of Contents for 7450 ESS Series





























































































































































































































































































































































































































































































































































Reviews:

No comments