Alcatel-Lucent 7450 ESS Series Configuration Manual Download Page 451

Page: 451 / 540

Filter Policies

7450 ESS OS Router Configuration Guide

Page 451

Output

Show Filter (with filter-id specified) —

The following table describes the command output for

the command when a filter ID is specified.

Label

Description

Filter Id

The IP filter policy ID.

Scope

Template —

The filter policy is of type template.

Exclusive —

The filter policy is of type exclusive.

Entries

The number of entries configured in this filter ID.

Description

The IP filter policy description.

Applied

No —

The filter policy ID has not been applied.

Yes —

The filter policy ID is applied.

Def. Action

Forward —

The default action for the filter ID for packets that do not

match the filter entries is to forward.

Drop —

The default action for the filter ID for packets that do not

match the filter entries is to drop.

Filter Match

Criteria

IP —

Indicates the filter is an IP filter policy.

Entry

The filter ID filter entry ID. If the filter entry ID indicates the entry is

(Inactive)

, then the filter entry is incomplete as no action has been

specified.

Log Id

The filter log ID.

Next-header

The next header ID for the match criteria.

Undefined

indicates no

next-header specified.

ICMP Type

The ICMP type match criterion.

Undefined

indicates no ICMP type

specified.

Fragment

False —

Configures a match

on all non-fragmented IP packets.

True —

Configures a match on all fragmented IP packets.

Off —

Fragments are not a matching criteria. All fragments and non-

fragments implicitly match.

Sampling

Off —

Specifies that traffic sampling is disabled.

On —

Specifies that traffic matching the associated IP filter entry is

sampled.

IP-Option

Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.

TCP-syn

False —

Configures a match on packets with the SYN flag set to

false.

Summary of Contents for 7450 ESS Series





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 7450 ESS Series

Reviews:

Related manuals for 7450 ESS Series

Brands by name

Popular brands

Alcatel-Lucent 7450 ESS Series, Configuration Manual

Search results

Summary of Contents for 7450 ESS Series

Reviews:

Related manuals for 7450 ESS Series

Brands by name

Popular brands