Alcatel-Lucent 7450 ESS Series, Configuration Manual

Page: 212 / 540

Page 212 7450 ESS OS Router Configuration Guide
status
Syntax status
Context show>router
Description This command displays the router status.
Output Router Status Output — The following table describes the output fields for router status
information.
Sample Output
Note that there are multiple instances of OSPF. OSPF-0 is persistent. OSPF-1 through OSPF-31 are
present when that particular OSPF instance is configured.
*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
Admin State Oper State
----------------------------------------------------------------
Router Up Up
OSPFv2-0 Up Up
Label Description
Router The administrative and operational states for the router.
OSPF
The administrative and operational states for the OSPF protocol.
RIP The administrative and operational states for the RIP protocol.
ISIS The administrative and operational states for the IS-IS protocol.
MPLS
The administrative and operational states for the MPLS protocol.
RSVP The administrative and operational states for the RSVP protocol.
LDP The administrative and operational states for the LDP protocol.
Max Routes
The maximum number of routes configured for the system.
Total Routes The total number of routes in the route table.
ECMP Max Routes The number of ECMP routes configured for path sharing.
service-id
state —
Current single SFM state
start —
Last time this vRtr went into overload, after having
respected the hold-off time
interval —
How long the vRtr remained or is in overload
Triggered Poli-
cies
No —
Triggered route policy re-evaluation is disabled.
Yes —
Triggered route policy re-evaluation is enabled.