Alcatel-Lucent 7450 ESS Series, Configuration Manual

Page: 161 / 540

IP Router Configuration
7450 ESS OS Router Configuration Guide Page 161
Show Commands
aggregate
Syntax aggregate [ family ] [ active ]
Context show>router
Description
This command displays aggregate routes.
Parameters
family — Specifies to display IPv4 or IPv6 aggregate routes.
Values
ipv4, ipv6
active — When the active keyword is specified, inactive aggregates are filtered out.
arp
Syntax arp [ ip-int-name | ip-address/mask | mac ieee-mac-address | summary ] [ local | dynamic |
static | managed ]
Context show>router
Description
This command displays the router ARP table sorted by IP address. If no command line options are spec-
ified, all ARP entries are displayed.
Parameters
ip-address/mask — Only displays ARP entries associated with the specified IP address and mask.
ip-int-name — Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays ARP entries associated with the specified MAC address.
summary — Displays an abbreviate list of ARP entries.
[ local | dynamic | static | managed ] — Only displays ARP information associated with the keyword.
Output ARP Table Output —
The following table describes the ARP table output fields:
Label Description
IP Address
The IP address of the ARP entry.
MAC Address The MAC address of the ARP entry.
Expiry
The age of the ARP entry.
Type
Dyn —
The ARP entry is a dynamic ARP entry.
Inv —
The ARP entry is an inactive static ARP entry (invalid).
Oth —
The ARP entry is a local or system ARP entry.
Sta —
The ARP entry is an active static ARP entry.