Alcatel-Lucent 7450 ESS Series, Configuration Manual, Page: 107 / 540

IP Router Configuration
7450 ESS OS Router Configuration Guide Page 107
log — This optional parameter enables the ability to log transitions between active and in-active
based on the CPE connectivity check. Events should be sent to the system log, syslog and SNMP
traps.
Sample Output
*B:Dut-C# configure router "management"
*B:Dut-C>config>router# info
----------------------------------------------
static-route 1.1.1.0/24 next-hop 172.31.117.1
static-route 1::/96 next-hop 3000::AC1F:7567
----------------------------------------------
*B:Dut-C>config>router#
*B:Dut-C>config>router# show router "management" route-table
===============================================================================
Route Table (Router: management)
===============================================================================
Dest Prefix Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
1.1.1.0/24 Remote Static 00h01m29s 0
172.31.117.1 1
138.203.0.0/16 Remote Static 05h01m11s 0
172.31.117.1 1
172.31.117.0/24 Local Local 05h04m10s 0
management 0
-------------------------------------------------------------------------------
No. of Routes: 3
===============================================================================
*B:Dut-C>config>router#
*B:Dut-C>config>router# show router "management" route-table ipv6
===============================================================================
IPv6 Route Table (Router: management)
===============================================================================
Dest Prefix Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
1::/96 Remote Static 00h01m09s 5
3000::AC1F:7567 1
3000::/96 Local Local 05h04m12s 5
management 0
3FFE::/96 Remote Static 00h00m11s 5
3000::AC1F:7567 0
-------------------------------------------------------------------------------
No. of Routes: 3
===============================================================================
*B:Dut-C>config>router#
Note that the help info output (?) is inherited from the basic router context and does not reflect the
specific syntax for the management context.
Only next-hop is allowed with any extra parameters.
*B:Dut-C>config>router# show router "management" static-?
static-arp static-route