background image

Alcatel-Lucent 

Last revised: 1 Dec 2009 

01RN0031_H0-30 

4.1.1 Splitting N1 files 

Some of the Release 9.0 N1 files are too large to fit onto a single floppy disk. However, a 
floppy disk may be the preferred way to transfer an N1 file onto a PC running the Craft 
Interface Node Manager for software downloads to a node. 

It is possible to split an N1 file using either Unix or DOS commands and then recombine 
the file on a PC.  

For example, to split a file on a Unix workstation, enter: 

dd if=1117H020.n1 of=1117H020.n1a ibs=1k count=1024 

dd if=1117H020.n1 of=1117H020.n1b ibs=1k skip=1024 

To combine the split files on a PC workstation, enter: 

copy /b 1117H020.n1a + 1117H020.n1b 1117H020.n1 

If splitting files on a PC, the commands used depend on the version of DOS being used. 
Recent versions of DOS include an MSBACKUP command that can be used to split files. 

 

4.2 Restrictions 

Restrictions 6 to 23 are not specific to this Release 9.0 load but also apply to previous 
releases of the 3600 and 3600+ MainStreet software. 

1)

 

Dual E3/Dual E3-2 pair 

If a 3600 MainStreet multishelf system containing a Dual E3 and Dual E3-2 pair is 
upgraded from Release 7.1 to Release 9.0 and is then downgraded back to Release 7.1, 
the inactive Control card may not reset and therefore not revert to Release 7.1. If the 
inactive card is reset manually, it will revert back to Release 7.1. 

2)

 

Minimum revision levels 

Minimum revision levels as per 01NUP0005 and 39NUP0003 must be adhered to. 

3)

 

GSLC-12 and GSLC-16 line cards 

The GSLC-12 and GSLC-16 line cards are compliant with ITU-T Recommendation 
G.991.2 for G.SHDSL, with some exceptions in Annex A and B. These minor 
exceptions are consistent with accepted industry limitations regarding loop 
performance for a few specific test configurations and are typically not issues in actual 
field implementations. 

4)

 

5620 NM downloads 

The 5620 NM cannot currently download more than approximately eight NTUs 
simultaneously, depending on the speed of the path between the 5620 NM and the 
3600/3600+ MainStreet node hosting the NTUs being downloaded. 

Page 7 

Summary of Contents for 3600 MainStreet













Reviews: