8
5
18
22
2. Start-up
The viaplus is supplied to you ready for operation. This means that
a special bracket [22] to which the viaplus is attached has been mounted to
both sides of the wheelchair,
the viaplus has been fitted to the wheelchair,
the viaplus control unit has been mounted on the push handles of the wheelchair,
a battery pack [18] to power the viaplus has been attached below the wheelchair.
Your viaplus is thus ready for operation and can be started and operated by following
the instructions in the chapters below.
!
The installation of the bracket [22] and all necessary adjustments
to the viaplus must be carried out by Ulrich Alber GmbH, its repre-
sentative or your authorised specialist dealer.
!
Regularly check the bracket [22] to ensure that it is firmly secured
to the wheelchair. If a screw connection has become loose, contact
your specialist dealer or Alber representative to have it retightened.
It might be necessary to readjust the device.
!
Ulrich Alber GmbH provides brackets of various design (single-part
or multiple-part brackets). The bracket shown in figures in this
operating manual might therefore deviate from that attached to
your bracket.
!
Before starting the viaplus, carefully read the operating manual
and in particular chapter 7 (safety and hazard information).
•
•
•
•
GA-V12_GB.indd 5
26.05.2010 13:04:01
