4
8
25
24
23
4
5
22
4
5
22
23
4.2 Attaching viaplus to wheelchair
To attach the viaplus to the wheelchair, we recommend holding the unit by its
pedal [6] and sliding it under the wheelchair.
At the wheelchair (both sides):
Ensure that the mounting forks [8] engage at the cross strut of the wheelchair [25]
as shown in the diagram.
Slide the bolts [4] of the viaplus into the mounting forks [24] of the bracket [22].
The setting ring [5] attached to the bolt [4] must thereby be located inside the
bracket [22] (i.e. towards the centre of the wheelchair).
Press down the releasing device at the centre of the quickpin [23] and move
the quickpin to the stop through the mounting fork [24] and along the inserted
bolt [4].
!
Ensure that the viaplus is properly attached to the two brackets [22]
mounted on the wheelchair.
It must be impossible to remove the viaplus from the mounting
forks [24] without first removing the quickpin [23]!
•
•
•
GA-V12_GB.indd 14
26.05.2010 13:04:07
