PX865PE/ PX865P Series
32
Resources Controlled By
BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose
Auto, you will not be able to manually assign IRQ DMA and memory base address fields, since
BIOS automatically assigns them. Options: Auto (ESCD) (default)
、
Manual
IRQ Resources
When resources are controlled manually, you can assign each system interrupt a type, depending on
the type of device using the interrupt. This is only configurable when “Resources Controlled By” is
set to “Manual”.
Options: IRQ-3/ 4/ 5/ 7/ 9/ 10/ 11/ 12/ 14/ 15
assigned to
PCI device
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA controller and
map it to their display as a way to provide boot information and VGA compatibility.
Options: Disabled (default)
、
Enabled
PCI Latency Timer (CLK)
This item allows you to set up the PCI Latency Time (0-255). If you select the “32” it will optimize
PCI speeds. Options: 0-255
、
32 (default)
PCI SLOT1- 5
This item allows you to select an IRQ address for PCI slot 1-5.
Options: Auto (default)
、
3
、
4
、
5
、
7
、
9
、
10
、
11
、
12
、
14
、
15
Frequency/Voltage Control
CPU Host Frequency (MHz)
This item displays the CPU Host frequency . You can set it from XXX to 255. The default depends
on your CPU frequency. The default for this field depends on the CPU installed.
CPU Clock Ratio
This field will only display if the CPU has not been set to a locked state by the CPU manufactory. If
your CPU is locked, you will not be able to adjust the “CPU Clock Ratio”. Options: 8X - 50X
