Albatron PX865P Series User Manual Download

Page: 8 / 60

PX865PE/ PX865P Series

Universal Serial Bus:

Supports up to eight USB ports for USB interface devices

Supports USB 2.0 Enhanced Host Controller Interface (EHCI) and dual USB 1.1 Open
Host Controller Interface (OHC1)

I/O facilities:

One multi-mode Parallel Port capable of supporting the following specifications:

1. Standard & Bi-direction Parallel Port

2. Enhanced Parallel Port (EPP)

3. Extended Capabilities Port (ECP)

Supports two serial ports, 16550 UART

Supports Infrared Data Transmission using IrDA

Supports PS/2 mouse and PS/2 keyboard

Supports 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB floppy disk drives

MIDI port compatible

Game port compatible

IDE Facilities:

Supports Ultra ATA 66, Ultra ATA 100, BMIDE and PIO modes

Supports IDE interface with CD-ROM

Supports high capacity hard disk drives

Supports installation of up to 4 drives, with separate IDE connections for Primary and
Secondary connectors

Serial ATA facilities:

Compatible with SATA Spec 1.0

Supports Serial ATA specification of 150 MB/sec transfers

BIOS:

Phoenix-Award™ BIOS

Supports APM1.2

Supports ACPI power management

Summary of Contents for PX865P Series





























































Search results

Summary of Contents for PX865P Series

Reviews:

Related manuals for PX865P Series

Brands by name

Popular brands

Albatron PX865P Series, User Manual

Search results

Summary of Contents for PX865P Series

Reviews:

Related manuals for PX865P Series

Brands by name

Popular brands