PX865PE/ PX865P Series
38
RxD, TxD Active
This item determines the RxD and TxD frequencies. This field only configurable if “UART Mode
Select” is set to “ASKIR” or “IrDA”. Options: Hi / Lo (default)
、
Hi / Hi
、
Lo / Hi
、
Lo / Lo
IR Transmission Delay
This item allows you to enable/disable IR transmission delay. This field only configurable if “UART
Mode Select” is set to “ASKIR” or “IrDA”. Options: Enabled (default)
、
Disabled
UR2 Duplex Mode
Select the transmission mode used by the IR interface. Full-duplex mode permits simultaneous
bi-directional transmission. Half-duplex mode permits transmission in only one direction at a time.
This field only configurable if “UART Mode Select” is set to “ASKIR” or “IrDA”.
Options: Half (default)
、
Full
Use IR Pins
Consult your IR peripheral documentation to select the correct setting of the TxD and RxD signals.
This field is only configurable if “UART Mode Select” is set to “ASKIR” or “IrDA”.
Options: Full
、
Half (default)
Onboard Parallel Port
Select an address and corresponding interrupt for the onboard parallel port.
Options: 378/IRQ7 (default)
、
278/IRQ5
、
3BC/IRQ7
、
Disabled
Parallel Port Mode
This option allows you to select a parallel port mode for the onboard parallel port.
Options: ECP(default) Extended Capabilities Port.
EPP
Enhanced
Parallel
Port.
SPP
Standard Printer Port.
ECP+EPP ECP & EPP mode.
Normal
EPP Mode Select
Select EPP port type 1.7 or 1.9. This field is only configurable if “Parallel Port Mode” is set to “EPP”
or “ECP+EPP”. Options: EPP 1.9(default)
、
EPP 1.7
