BYPASS CONTROL
CODE FUNCTION
5 ZONE BYPASS
ON
6 ZONE BYPASS
OFF
TO ENTER A SYSTEM CONTROL FUNCTION CODE
1. LOAD VALID FOUR DIGIT ACCESS CODE, THEN PRESS #,(POUND), KEY TO ENTER CODE
2. ENTER THE SELECTED FUNCTION CODE, THEN PRESS #,(POUND), KEY TO ENTER CODE
TO ENTER A BYPASS CONTROL FUNCTION CODE
1. LOAD VALID FOUR DIGIT ACCESS CODE, THEN PRESS #,(POUND), KEY TO ENTER CODE
2. LOAD SELECTED BYPASS FUNCTION CODE, THEN PRESS ,(STAR). KEY TO ENTER
3. LOAD TWO DIGIT ZONE NUMBER,(01 - 32), THEN PRESS #,(POUND), KEY TO EXECUTE
NOTE: ONLY ONE ZONE AT A TIME CAN BE BYPASSED OR UN-BYPASSED
C. ANNUNCIATE RESET
THE AUDIBLE ANNUNCIATOR WILL SOUND WHEN A ZONE HAS BEEN VIOLATED OR A SYSTEM TROUBLE SIGNAL
IS DETECTED. NOTE: AFTER ACKNOWLEDGMENT OF THE ACTIVITY THE ANNUNCIATOR MUST BE RESET.
TO RESET THE AUDIBLE ANNUNCIATOR
1. ENTER VALID FOUR DIGIT ACCESS CODE, THEN PRESS
#
,(POUND), KEY TO ENTER
2. PRESS KEY 1
3. PRESS
#
,(POUND), KEY TO EXECUTE
THE AUDIBLE ANNUNCIATOR WILL BE SILENCED WHEN KEYS ARE PRESSED. IF THE AUDIBLE ANNUNCIATOR IS NOT
RESET, THE AUDIBLE SIGNAL WILL SOUND AFTER THE LAST KEY IS PRESSED.
D. MEMORY RESET
WHEN A ZONE HAS BEEN VIOLATED THE ZONE MEMORY IS SET. IN ORDER TO MONITOR THE ZONE STATUS THE
ZONE MEMORY MUST BE RESET.
TO RESET THE ZONE MEMORY
1. ENTER A VALID FOUR DIGIT ACCESS CODE, THEN PRESS
#
,(POUND),KEY TO ENTER
2. PRESS KEY 2
3. PRESS
#
,(POUND), KEY TO EXECUTE
THE ZONE MEMORY WILL RESET, THE ZONE INDICATOR WILL TURN
OFF
UNLESS THE ZONE IS STILL VIOLATED.
E. DAY ZONE MODE
THE DAY ZONE MODE IS ACTIVE WHEN THE DAY ZONE STATUS INDICATOR IS
ON.
ALL DESIGNATED DAY ZONES
ARE BYPASSED WHEN THE DAY ZONE MODE IS ACTIVATED ALLOWING FREE ACCESS TO THOSE ZONES WITHOUT
CAUSING A VIOLATION.
TO ACTIVATE THE DAY ZONE MODE
1. ENTER VALID FOUR DIGIT ACCESS CODE, THEN PRESS
#
,(POUND), KEY TO ENTER
2. PRESS 3 KEY
3. PRESS
#
,(POUND), KEY TO EXECUTE
IF DAY ZONE MODE WAS
OFF
DAY ZONE MODE WILL TURN
ON.
IF DAY ZONE MODE WAS
ON
DAY ZONE MODE WILL
TURN
OFF.
NOTE: ALL DAY ZONES ARE BYPASSED WHEN THE DAY MODE IS
ON.
F. SYSTEM TEST
IT IS RECOMMENDED THAT THE SYSTEM TEST BE OPERATED AT LEAST ONCE A WEEK TO CHECK ALL ZONE STATUS,
SYSTEM INDICATORS AND STAND-BY BATTERY CONDITION.
PAGE 2
*
Summary of Contents for ZAC-32
Page 11: ......
