Alarm Controls Corporation ZAC-32, User Manual

Page: 7 / 15

VII.
CONNECTIONS TO ZAP-256 PRINTER INTERFACE, (SEE ZAP-256 INSTRUCTIONS FOR
FURTHER DETAILS)
ZONE ANNUNCIATOR TO PRINTER INTERFACE
TERMINALS TERMINALS
1 (RED)
1 OR 6 (RED)
2 (GREEN) 2, 3, 4, 5, 7, 8, 9, 10 (GREEN)
3 (YELLOW) 11 OR 12 (YELLOW)
4 (BLACK) 13 OR 14 (BLACK)
NOTE: THE RED WIRE FROM EACH ZONE ANNUNCIATOR MAY BE CONNECTED TO EITHER
TERMINAL 1 OR 6 ON THE PRINTER INTERFACE. TERMINALS 1 AND 6 ARE INTERNALLY
CONNECTED. DUAL TERMINALS ARE PROVIDED TO LIMIT THE NUMBER OF CONNECTIONS
ON EACH TERMINAL. THE GREEN WIRE FROM EACH ZONE ANNUNCIATOR MAY BE
CONNECTED TO EITHER TERMINAL
2,3,4,5,7,8,9,10
ON THE PRINTER INTERFACE.
VIII. AUXILIARY VOLTAGE OUTPUTS 12 VOLTS DC
THE ZONE ANNUNCIATOR HAS EIGHT SETS OF AUXILIARY VOLTAGE OUTPUT TERMINALS.
EACH SET OF OUTPUT TERMINALS IS FUSED WITH A 500 MA., 5 MM FUSE, (ACC P/N SS2-5).
THE MAXIMUM TOTAL CURRENT AVAILABLE FROM THESE OUTPUTS IS 700 MA. THIS TOTAL
OF ALL OUTPUTS SHOULD NOT BE EXCEEDED. USE THE PROVIDED CHART TO TOTAL THE
SUM OF THE OUTPUTS.
VOLTAGE OUTPUT TERMINALS CURRENT USED
19 + & 20-
_ _ _ _ _ _ _ _ MA.
25 + & 26-
_ _ _ _ _ _ _ _ MA.
32 + & 32-
_ _ _ _ _ _ _ _ MA.
37 + & 38-
_ _ _ _ _ _ _ _ MA.
43 + & 44-
_ _ _ _ _ _ _ _ MA.
49 + & 50-
_ _ _ _ _ _ _ _ MA.
55 + & 56-
_ _ _ _ _ _ _ _ MA.
61 + & 62-
_ _ _ _ _ _ _ _ MA.
TOTAL NOT TO EXCEED 700 MA. _ _ _ _ _ _ _ _
IX. EXTERNAL STATUS OUTPUTS
THE ZONE ANNUNCIATOR HAS FOUR EXTERNAL STATUS OUTPUTS. THESE OUTPUTS WILL
SUPPLY 10 VDC @ 28 MA. TO AN EXTERNAL DEVICE. THE EXTERNAL STATUS OUTPUTS
SWITCH GROUND WHEN ACTIVE. THE OUTPUT MUST BE CONNECTED TO THE NEGATIVE
SIDE OF THE DEVICE TO BE OPERATED. ALL EXTERNAL STATUS OUTPUTS CAN BE
CONNECTED TOGETHER TO COMBINE FUNCTIONS.
EXTERNAL STATUS OUTPUT
TERMINALS
ANNUNCIATE (ANN)
15 & ANY POSITIVE TERMINAL
BYPASS (BYP) 16 & ANY POSITIVE TERMINAL
LOW BATTERY (LBT) 17 & ANY POSITIVE TERMINAL
AC POWER FAILURE (PFL) 18 & ANY POSITIVE TERMINAL
PAGE 4