background image

OPERATING THE KEYPAD IN THE MANUAL MODE TO OPEN DOOR

Enter any of the programmed User Codes. (

see page 3 for Programming User Codes

then press             key to open the door.

Yellow Led turns on for 1 second then turns off.

OPERATING THE KEYPAD IN THE AUTO ENTRY MODE TO OPEN DOOR

Enter the User Code which can be from 4 to 8 digits long. 

door opens.  Yellow Led turns on for 1

second then turns off.

USING THE KEYPAD LOCKOUT CODE IN THE MANUAL MODE

Enter the Keypad Lockout code which can be from 4 to 8 digits long.

then press            key.  The keypad is

locked out.  The Red Led turns on.  Re-enter the Lockout Code to unlock the keypad.

The Red Led turns off.

USING THE KEYPAD LOCKOUT CODE IN THE AUTO ENTRY MODE

Enter the Keypad Lockout code which can be from 4 to 8 digits long.

The keypad is locked out.  The Red Led is

turned on.  Re-enter the Lockout Code to unlock the keypad.  The Red Led turns off.     

PAGE 5

USER OPERATING INSTRUCTIONS

LIMITED WARRANTY

ALARM CONTROLS CORPORATION

, (Seller), 

19 BRANDYWINE DRIVE, DEER

PARK, NY 11729, 

warrants its Digital Keypads, (The Product), to be free from defects in

material and workmanship for two years from date of original purchase, under normal use

and service.  Seller’s obligation is limited to repairing or replacing, at its option, free of

charge for parts and labor, or transportation, any part proven to be defective in material

and workmanship under normal use and service.  Seller shall have no other obligation

under this warranty or otherwise if the product is altered or improperly repaired or serviced

by anyone other than the Seller. 

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS-

ED OR IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS

FOR ANY PARTICULAR PURPOSE OR USE, AND IN NO EVENT SHALL SELLER BE

LIABLE FOR INCIDENTIAL OR CONSEQUENTIAL DAMAGES AS SAME ARE DEFINED

IN THE UNIFORM COMMERCIAL CODE.

ALARM CONTROLS CORPORATION

19 BRANDYWINE DRIVE  P.O. BOX 280

DEER PARK, NY 11729

PH: 800 645-5538  EMAIL: [email protected]

x x x x x x x x

#

X X X X X X X X

#            

X X X X X X X X

X X X X X X X X               

Summary of Contents for KP-100










Reviews: