USE DIODE
SUPPLIED
IF REQUIRED
EG
IN
N/C
TAMPER
SWITCH
12/24V
AC/DC
+
OUTPUT
N/C C N/O
RTE
INPUT
N/O CONTACT
REQUIRED
12/24 VOLT
POWER
SUPPLY
CONNECT
TO PANIC
INPUT
-
MAGNETIC
LOCK
ELECTRIC
STRIKE
REQUEST TO
EXIT STATION
OR
The KP-100 is a universal self-contained digital keypad with field proven reliability that will
operate on 12 or 24 volts AC or DC. This keypad is suitable for residential, industrial and
commercial installations and is compatable with all electric locking devices.
Programmed data is stored in a non-volitile EEPROM memory so all programmed data is not
lost in the event of a power outage.
IMPORTANT FEATURES
FULLY PROGRAMMABLE FROM THE KEYPAD
RECESSED OR SURFACE MOUNT, BACK BOX SUPPLIED
100 USER CODES WITH CODE LENGTHS FROM 4 TO 8 DIGITS
KEYS ARE BACK LIT FOR VISIBILITY IN DARK AREAS
KEYS ARE HARD PLASTIC WITH AUDIBLE AND VISUAL KEY PRESS FEEDBACK
10 AMPERE RELAY CONTACTS
BUILT-IN TAMPER SWITCH
BUILT-IN BUZZER
REQUEST TO EXIT INPUT
RED, YELLOW AND GREEN LEDS INDICATE THE CONDITION OF THE KEYPAD
TWO YEAR LIMITED WARRANTY
SPECIFICATIONS
OPERATING VOLTAGE: 12 OR 24 VOLTS AC/DC, AUTO VOLTAGE SELECTION
ACTIVE CURRENT DRAW: 50 MA. MAX. @ 12 VOLTS, 65 MA. MAX @ 24 VOLTS
IDLE CURRENT DRAW: 9 MA. MAX. @ 12V VOLTS, 17 MA. MAX. @ 24 VOLTS
RELAY CONTACT RATING: 10 A. @ 28 VDC/120 AC
RELAY CONTACT ARRANGEMENT: SINGLE POLE-DOUBLE THROW, (1 FORM C)
EGRESS INPUT: NORMALLY-OPEN CONTACTS, (RTE INPUT)
TYPICAL WIRING DIAGRAM
PAGE 1
