background image

When the keypad is programmed for 

Auto Entry

mode the       key that follows the entered 

Code Number is 

not

required.  In this mode the User Code must be the same length as the In-

staller Code and the code length can be from 4 to 8 digits in length. 
To program the keypad for Auto Entry press              then press       then press the       key.

#

#

2

8

1

FALSE CODE LOCKOUT FEATURE

CODE ENTRY MODES/AUTO OR MANUAL

The keypad will lockout for 30 seconds after 10 false codes are entered.

The keypad generates 5 beeps for each unsuccessful code entry.  

PAGE 4

PROGRAMMING OPTIONS

The keypad can be programmed with additional features by using the following options.

You have only 10 seconds between key entries otherwise the keypad will return
to the Program Mode. 

See 

ENTERING THE PROGRAM MODE

on page 3.

The keypad must be in the Program Mode in order to install these options.

KEYPAD LOCKOUT

The keypad beeper can be silenced if required.  The beeper will not sound when the keys 

are pressed.
For silent keypad operation press             then press        then press the       key.  The keypad

is now in the Silent Mode.  To restore to audible keypad operation press             then press

then press the       key.  

The keypad is now in the audible mode.

The relay can be programmed to turn on or off with each successive entry of the User Code.
Press             then press the        key.  The relay will turn on or off depending upon its last
state.  To return relay to Momentary Mode see 

SETTING THE RELAY ON TIME

on page 3.

RELAY LATCHING MODE

#

0

3

8

#

1

3

8

KEYPAD SILENT MODE

#

1

4

The keypad can be programmed to notify the user when the output relay is energized or the

egress button has been pressed.  This feature is ideal for use with a locking device that is silent.

The buzzer sounds for 1 second.

For Output  Annunciation press             then press        then press the        key. The keypad now

has output annunciation.

To disable Output Annunciation press             then press        then press the        key. 

#

#

1

8

1

8

OUTPUT  ANNUNCIATOR

1

0

The keypad can be temporarily disabled to prevent unauthorized access at night or after office

hours by entering a predetermined lockout code which can be 4 to 8 digits long. The Red LED

will light when the Keypad Lockout is activated.
Press            then press the        key, then press             and enter the lockout code, then 

The Keypad Lockout is turned on and off by using the lockout code.

#

#

5 1

2 1

When the keypad is programmed for 

Manual

mode the       key that follows the entered User

Coder 

is 

required.  In this mode the the User Codes can be from 4 to 8 digits in length but all

the User Codes need not have the same number of digits.    
To program the keypad for Manual Mode press              then press       then press the       key.

The keypad is now in the Manual Mode.

#

2

8

0

#

Summary of Contents for KP-100










Reviews: