Alarko ALDENS 105, User Manual

Page: 59 / 76

59
4.1.2. Language Selection
On the main display, press ESC for a couple of times to see Boiler Temperature (or Cascade
Temperature for cascade case).
Press OK for once. Roll the selection wheel and stand on Operator Section. Press OK for once. As
in the right image you will see the active language setting. Press OK for once again. The language
name will start to blink. You can now roll the selection wheel to toggle between languages. When
you find the desired language, press OK for once to confirm.
When blinking, if you don’t press OK for 8 seconds, the selection will not be accepted and your
active setting will stay.
Attention! : If you are not familiar with a new language selection, it is impossible to take the
process back without the same steps. Thus you may get lost in the menu. Please refer to a
native speaker of the new language selection.
4.1.3. Setting The Comfort Temperature
If your system consists a room unit (temperature controller), comfort temperature will be the sensed
temperature by this device.
If your system does not contain a room unit, the temperature to be taken into account will be a
resultant value decided by an algorithm embedded in your boiler’s electronic controller (LMS14).
This value decision is based on boiler outflow temperature and outside temperature.
Before starting settings, you have to be sure if the screen image is at the main display. For this
purpose, press the “ESC” button for a couple of times.
In the coming pages, you can read the economy and frost protection settings.