49
Standard Chimney Types and Designations
The collector piping should be conversely inclined with the direction of exhaust because, the con-
densing water in the piping should be drained via the condensate trap and the syphon. The system
flue piping was given in the fore-pages of the manual. As underlining, in order to be able to drain the
condensate, exhaust piping should be inclined uphill. There should exist a condensate syphon at
the lower end of the collector piping.
In a similar way, the terminal part of the exhaust gas piping which is faced with the outer atmosphere
of the building should be downwards inclined in order to prevent from rain water drainage. The slope
should be nearly 3 degrees.
FRES
H
AIR
EXHA
UST (F
LUE G
AS)
C
H
IM
N
EY / EXH
AU
ST SH
AFT
Chimney Code
Explanation
B23
Exhauts pipe from inside the shaft, fresh air direct suction from the boiler medium (open type)
B23
Twin cascade exhaust from inside the shaft, fresh air direct suction from the boiler medium (open type)
B33
Exhaust pipe from inside the shaft, fresh air direct suction from the boiler medium, horizontal concentric connection
(open type)
B33
Horizontal concentric pipe connection to condensate proof chimney, fresh air from the boiler medium (open type)
C13x
Horizontal concentric passage for inclined roofs (hermetic type)
C33x
Vertical concentric passage from inclined or horizontal roof (hermetic type)
C43x
Connection to condensate proof fresh air/exhaust shaft; maximum horizontal length from boiler 1st elbow to shaft
connection is 2m (hermetic type)
C53
Exhaust line from inside the shaft, fresh air from outside (hermetic type)
C53x
Exhaust line from outside the building, discharge terminal from the roof (hermetic type)
C83x
Exhaust line from inside the shaft, fresh air from outside (hermetic type)
C83x
Concentric connection to condensate proof chimney, fresh air from outside (hermetic type)
C93x
Exhaust line from inside the shaft to the roof, fresh air from the free shaft, horizontal concentric connection (hermetic
type)
Summary of Contents for ALDENS 105
