AL-KO HT 600 FLEXIBLE CUT, Instruction Manual

Page: 14 / 260

Translation of the original operating instructions 14
AL-KO Hedge trimmer
About this handbook
„
Read these operating instructions before starting
operation. This is a precondition for safe working
and flawless operation.
„
Observe the safety warnings in this documenta-
tion and on the machine.
„
The operating instructions must be kept in a safe
place for future reference and passed on to any
subsequent operators.
Explanation of symbols
Caution!
Following these safety warnings carefully can
prevent personal injury and/or material damage.
Special instructions for greater ease of under-
standing and improved handling.
Product description
Designated use
This hedge trimmer is intended exclusively for non-
commercial trimming of hedges, shrubs and bushes.
Using this machine for any other or additional pur-
pose is considered contrary to its designated use.
The manufacturer cannot be held liable for any dam-
age resulting from such use.
Incorrect use
„
Safety equipment must not be removed or by-
passed, e.g. by tying down the switches on the
hand grips.
„
Do not use the machine in the rain or on wet
hedges and bushes.
„
The machine must not be used commercially.
Safety and protective equipment
Danger – risk of injury!
Safety and protective equipment must not be
disabled!
Child-proof lock
A hole (5 mm) is provided on the rear actuating lever
for fitting a padlock* ( 6 ). The padlock prevents the
machine from being switched on unintentionally.
* Not supplied
Handguard
Caution!
Risk of injury if the handguard is not installed!
Never start up the machine without the hand-
guard.
Two-hand operation
The hedge trimmer can only be operated using both
hands at the same time.
Contents
About this handbook ..................................................13
Product description ....................................................13
Safety and protective equipment ...............................13
Product overview .......................................................14
Meaning of symbols on the machine .........................14
Technical data ............................................................15
General Power Tool Safety Warnings ........................15
Assembly ...................................................................18
Operation ...................................................................18
Repairs ......................................................................18
Maintenance and care ...............................................19
Troubleshooting .........................................................19
Storage ......................................................................19
Disposal .....................................................................19
EC Declaration of Conformity ...................................20
Warranty ....................................................................20